SMX700HG

Description
The SMX700HG medical-grade UPS system provides dependable battery backup and is fully compliant
with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient
care vicinities. The 700VA/450W capacity provides up to 36 minutes of runtime for a half load or 14.5
minutes for a full load, so you can work through short power failures and perform an orderly system
shutdown in a prolonged blackout.
Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as
274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation
transformer with Faraday shield offers full isolation and removes common mode noise while maintaining
full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less
than 100 microamps.
This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14
plug on a 15-centimeter (six-inch) dongle. All six outlets provide both backup protection and surge
protection, rated to 340 joules.
The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work
with free downloadable PowerAlert® software for safe, unattended system shutdown in the event of a
prolonged power failure.
This UPS contains a lead acid battery designed to be connected continuously to an AC power source,
except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile
cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in
this type of application will void the battery warranty.